- Rated Heating Capacity (kW): 8.2
- Rated Power Consumption (kW): 2.5
- COP (W/W): 3.3
- Power: 1N~/50Hz
- Maximum Heating Water Temperature (°C): 90
- Maximum Inlet Water Temperature (°C): 40
- Working Environment Temperature (°C): -25~43
- Refrigerant: R744
- Maximum Pressure on Suction Side (Mpa): 9
- Maximum Pressure on Discharge Side (Mpa): 13
- Maximum Pressure at Low Pressure (Mpa): 9
- Maximum Pressure at High Pressure (Mpa): 13
- Type of Compressor: Rotor
- Tpye of Water Pipe: DN20
- Adaptive water pump: Shinhoo GPA25 series (With PWM function)
- Type of Protection Against Electric Shock: I
- Waterproof Grade: IPX4
- Weight (kg): 130
- Dimensions – Length (mm): 1055
- Dimensions – Width (mm): 420
- Dimensions – Height (mm): 1120
- Noise (dB(A))： ≤46
- UK-based technical support team, always ready to assist
- 5 Year Warranty
Harnitek CO2 Heat Pump 8kW
Product Code: HCYKT-3D
Introduction
The principle of CO2 air source heat pump is to use the Reversed Carnot Cycle to absorb a large amount of low-temperature heat in the air with very little electric energy, and convert it into high-temperature heat through the compression of the compressor to produce hot water. It is an energy-saving and efficient heat pump technology.
Different from the conventional air source heat pump, a typical CO2 heat pump system is mainly composed of four parts: a compressor dedicated to CO2; a gas-liquid separator; an expansion valve, and an evaporator.
Key Features
- Using natural carbon dioxide as a refrigerant does not harm the ozone layer.
- Strong adaptability to low temperature environments and high energy efficiency.
- High outlet water temperature (large temperature difference between inlet and outlet), up to 95 degrees Celsius.